Let customers speak for us
It fits the fret miter box perfectly and makes the job of cutting fret slots easy, stress free and almost effortless.
It's very easy to adjust the fret depth and once everything is aligned and set up for your fret saw it's the only adjustment that will need to be made. One of the threaded holes was a little rough but everything else was perfect.
Very happy with the sound hole router jig from Elmers Guitar. I haven’t used it yet but my StewMac dremel router fits perfectly and the construction and materials are good quality.
I love this product, it is well made the height adjustment is great and with the new model you can clamp your piece securely if you don't have a fret slot gauge. Great product for a great price.
I've been struggling getting a proper neck relief on my guitars, the gauges didn't seem to work very well for me, I kept getting frustrated. This is perfect, I can finally get an accurate reading and get the same relief across all of my guitars.
It's not cheap but it saves a lot of headache. Definitely a must buy if you like tinkering with your guitars.
I just needed the guitar holder parts…it upgraded my old cradle wooden parts perfectly. Great aluminum upgrade.
Fantastic product I wish I’d bought years ago. Fast accurate and easy. No more guessing
Get the right measurements easy
Wanted quality without breaking the bank. Works as it should. Makes easy work for setting up the neck. IF I had an issue (I don't) it wouldn't hurt to be a bit longer to cover the entire fretboard.
Great jig at an excellent price, and surprisingly fast shipping. Highly recommend Elmer for guitar tools. I also have their nut slotting gauge which us excellent. Keel up the good work.
Super thick stainless steel, feels heavy duty in hand, works exceptionally well. Easily rivals other fret rockers I've seen for 2x the price or more (looking at you, StewMac). Lacks the uber-clean polished edges of more expensive tools and shows some very light milling marks on the machined surfaces, but as a machinist myself I can confidently say that it 100% doesn't matter for a fret rocker. A straight, flat, machined edge is more than adequate (and no disrespect to other reviewers, but unless you have a surface grinder in your garage, please, do NOT try to sand or polish the marks out - the mill they used to make these is 1000% more accurate than your sandpaper, trust me). While I love StewMac for certain things, there's no reason to pay more than twice as much for such a simple tool. Buy this one, hang it on the wall with the rest of your setup gear, and use it whenever you need it. Great quality fret rocker for a killer price.
Exactly as expected. Very happy and ready to cut some rosettes! This won’t be my last purchase from Elmer!
I was so excited using it that I forgot to post. But WOWOWOW I am way through my first
fretboard and moving along. For this one i am doing resin fill, and its an Egyptian theme.
This jig makes drilling the tuner holes easy. Great product, a little pricy but worth it when the results are undeniable. When setting up multiple guitars this jig is a must.
Let customers speak for us
It fits the fret miter box perfectly and makes the job of cutting fret slots easy, stress free and almost effortless.
It's very easy to adjust the fret depth and once everything is aligned and set up for your fret saw it's the only adjustment that will need to be made. One of the threaded holes was a little rough but everything else was perfect.
Very happy with the sound hole router jig from Elmers Guitar. I haven’t used it yet but my StewMac dremel router fits perfectly and the construction and materials are good quality.
I love this product, it is well made the height adjustment is great and with the new model you can clamp your piece securely if you don't have a fret slot gauge. Great product for a great price.
I've been struggling getting a proper neck relief on my guitars, the gauges didn't seem to work very well for me, I kept getting frustrated. This is perfect, I can finally get an accurate reading and get the same relief across all of my guitars.
It's not cheap but it saves a lot of headache. Definitely a must buy if you like tinkering with your guitars.
I just needed the guitar holder parts…it upgraded my old cradle wooden parts perfectly. Great aluminum upgrade.
Fantastic product I wish I’d bought years ago. Fast accurate and easy. No more guessing
Get the right measurements easy
Wanted quality without breaking the bank. Works as it should. Makes easy work for setting up the neck. IF I had an issue (I don't) it wouldn't hurt to be a bit longer to cover the entire fretboard.
Great jig at an excellent price, and surprisingly fast shipping. Highly recommend Elmer for guitar tools. I also have their nut slotting gauge which us excellent. Keel up the good work.
Super thick stainless steel, feels heavy duty in hand, works exceptionally well. Easily rivals other fret rockers I've seen for 2x the price or more (looking at you, StewMac). Lacks the uber-clean polished edges of more expensive tools and shows some very light milling marks on the machined surfaces, but as a machinist myself I can confidently say that it 100% doesn't matter for a fret rocker. A straight, flat, machined edge is more than adequate (and no disrespect to other reviewers, but unless you have a surface grinder in your garage, please, do NOT try to sand or polish the marks out - the mill they used to make these is 1000% more accurate than your sandpaper, trust me). While I love StewMac for certain things, there's no reason to pay more than twice as much for such a simple tool. Buy this one, hang it on the wall with the rest of your setup gear, and use it whenever you need it. Great quality fret rocker for a killer price.
Exactly as expected. Very happy and ready to cut some rosettes! This won’t be my last purchase from Elmer!
I was so excited using it that I forgot to post. But WOWOWOW I am way through my first
fretboard and moving along. For this one i am doing resin fill, and its an Egyptian theme.
This jig makes drilling the tuner holes easy. Great product, a little pricy but worth it when the results are undeniable. When setting up multiple guitars this jig is a must.